Perfect for mounting K6 to r1300gs Paul Harle on Feb 25, 2024
Rating: 5
Nicely made aluminium (so it’s light) adjustable sliding mount for a camera. I needed something to mount my K^ camera neatley to the bike (the pads kept failing), so I purchased this and with a little fettling now have a sturdy camera mount that won’t lose adhesion.
Wunderlich camera mount Nick Hignett on Oct 25, 2023
Rating: 5
Quality well engineered camera mount which is not only very easy to fit ,but very practical in the way you can mount the camera and with plenty of adjustment and also easy to remove the camera when necessary. I would definitely recommend this to anyone for either blogging or just to capture footage when riding.
MR Stephen Gray on Feb 14, 2023
Rating: 5
Quality item well manufactured with easy installation
Easy Fit Mick Goodyer on Feb 14, 2022
Rating: 5
Quick delivery, easy to fit and doesn't vibrate when on the road,
go pro mount Gary on Jan 30, 2022
Rating: 3
Although designed for nearside indicator it does fit offside just change the camera angle. It is expensive but its Wunderlich nothing new there. Overall happy with the picture results and no parts of the bike intrude the video.
Very poor camera mount Richard Sharp on Oct 28, 2021
Rating: 1
Have bought lots of products from Nippy Normans, all excellent - until this. If you're in the market for an overpriced bent bit of metal which makes your camera vibrate, then this is the mount for you!
Wunderlich camera mount for indicator installation lee clements on Aug 20, 2020
Rating: 1
easy installation however vibrated at lower speeds and revs even when the camera position was adjusted close in to the bike. had to buy another option
Asymetric fixing Andy on Jul 17, 2019
Rating: 4
A good strong bracket that does the job but only fits to the left-hand-side indicator because the fixing plate is asymmetric. In the UK it would be better if the bracket could be fitted to the offside (right-hand-side) indicator.
Wunderlich Camera Mount B Scott on Jul 17, 2018
Rating: 4
A bit disappointed, did not come with the locking screw shown in the product picture and I find not as stable as advertised unless camera very close to bike bodywork.
Go pro mount John Muirhead on May 16, 2018
Rating: 3
Mount stem vibrates but does not appear to affect picture quality however the three bladed camera attachment is of different quality to go pro it is sturdier and thicker than original which causes a problem in tightening camera to mount it will not tighten up because the three wings are too strong and won't flex/bend to pull the bracket together result is camera moves with the small vibration pointing up or down have resolved this by fitting a further fastener between camera and mount but now have an ugly attachment not really impressed with this for the original cost
mr paddy on May 08, 2018
Rating: 3
good idea but have to mark down because of a lot of vibration at low speed would need some sort of support or bracing
Go Pro Mount for GS 1200 2018 Wynne on May 06, 2018
Rating: 3
Designed for left nearside indicator mount, although can be fitted to right offside indicator mount at an angle. Subject to a lot of vibration, so pictures are blurry.
Camera Mount Craig Lumsden on Apr 02, 2018
Rating: 4
Sturdy camera mount. A tad pricey, but good quality and does the job well.
Not Perfect Stephen Burns on Feb 24, 2018
Rating: 4
Well thought out accessory and a good position for mounting a camera (can use both sides). Negatives - the tightening/adjustment screw is chrome against otherwise black parts and the folding loop hangs down and rattles.
Camera mount Andy T on Jan 07, 2018
Rating: 4
It works for the most part fine when the bike is moving. At slow speeds and especially when stationary, vibration affects the picture, giving it a jelly-like effect. The mount has little stiffness in the vertical plane, which is disappointing for what is an expensive item. It held a gopro-shaped camera in position at speeds of 70mph+.
Excellent camera mounts Lloyd Sanderson on Jan 05, 2018
Rating: 5
Wunderlich delivers again I am using in conjunction with indicator grills from Wunderlich and the front left mount carries an innov dash cam and a Go Pro. I wanted to use another mount on the right rear indicator for my rear Innov camera but had to modify it slightly with a dremel now fits perfectly very glad I bought these better than some old tat for a bracket on a bike of this status
Camera Mount Nick B on Dec 23, 2017
Rating: 4
Easy to fit . Not clear from the instructions but it is intended to fit on the nearside indicator. It can be also be fitted to the offside Expensive at £35 for what it is, although it up to the usual Wunderlich high build quality.
Camera mount Dave Hardwicke on Jul 21, 2017
Rating: 5
Didn't like the idea of mounting a camera on my lid, but struggled to find anywhere on the bike that wouldn't wobble or require drilling. Saw this mount on FB and used it off roading in Norway, got excellent videos + the bonus of being able to change sides depending if riding on left or right h/s of the road
Review of camera mount Colin Blackburn on Jul 20, 2017
Rating: 4
Product arrived on time and seems well made. Easy to fit.
Needs modifying John on Jul 03, 2017
Rating: 3
I did get this part to do what I needed it to do - but only after modifying it.
It uses the standard 1/4 inch tripod mounting screw to fix the camera to the mount. While this is fine for a stationary tripod it isn't fine for a moving shaking motorcycle. I had no confidence that the camera would not fall off.
To fit a gopro camera, a gopro style base is supplied. So I drilled two holes on each side of the base and fixed to the arm using M4 screws, nuts and spring washers. That works well and my hero 5 camera has now done about 1500 miles securely attached.
Rating Tony on May 24, 2017
Rating: 4
A most efficient and easy way of mounting a camera.
Camera Mount - Good but expensive Owen Wright on Sep 29, 2016
Rating: 4
Easy to fit and holds the camera steady. Not clear from the instructions but it is intended to fit on the nearside indicator. It can be fitted to the offside but needs a flexible mount to get the camera line right. Delivered without camera mounting screw which followed swiftly on raising the issue. Expensive at £30 for what it is.
Mr Mark Bailey on Jul 09, 2016
Rating: 4
Solid and ok for the job. Need to ensure all screws attaching camera (under and side) are really tight to prevent camera leaning back with wind pressure or getting loose on bracket
Mr. Daniel O'Driscoll on May 17, 2016
Rating: 4
The mount vibrates a bit, as one would expect, but there hasn't been any movement of the Go pro from its initial position after 500 miles of often very rough Irish backroads, during which my sat nav mount snapped
mr ian caulkett on May 04, 2016
Rating: 3
GREAT LITTLE BRACKET WELL MADE AND SO EASY TO FIT
